Selecting hoops manually

ShowHoop00014.png 

Click View > Show Hoop to turn hoop display on or off. Right-click to change hoop settings.

ZoomToHoop.png 

Click Zoom > Zoom To Hoop to view entire hoop in the design window.

From your My Hoops list, you can manually select your preferred hoop. Generally you will want to select the smallest hoop which will accommodate your design. This will hold the fabric tight while stitching. When you output your design, most machines will automatically center the design within the hoop according to its geometric extents. Some machines will center designs in the hoop at the start needle position. For these machines, you can set a starting point using Auto Start & End settings.

For display purposes, EmbroideryStudio will generally ensure that the design is centered in the hoop. However, you can use the manual option to lock the hoop position onscreen. This means it won’t automatically center while you are digitizing. It’s always a good idea, however, to turn auto-centering back on to check that the design will fit within the selected hoop.

To change hoops...

ShowHoopDefault.png

 

hoops00015.png

 

hoops00018.png

 

Normally the hoop will center itself around the geometric center of the design. However, you have the option of centering around the start needle position. This option is usually used on conjunction with Auto Start & End settings.

hoops00021.png

 

HoopedDesignWithTemplate00024.png

 

Tip: You can include the hoop template in the production worksheet, together with alignment and registration guide markings. This allows you to cut out the printed design and align it within the hoop. Use the template markings to align it to physical hoop template.

Related topics...