Reshape letters

ReshapeObject00052.png 

Use Reshape > Reshape Object to reshape individual letters on screen.

Create special lettering effects by reshaping letter outlines with the Reshape Object tool.

To reshape letters...

1Select the lettering object and click Reshape Object.

2Click the letter outline. Control points appear around the outline. Selectively turn off control points as required.

lettering_edit00053.png

 

3Select reshape nodes by any of the following means:

lettering_edit00056.png

 

4Reshape the letter like any other object and press Enter.

lettering_edit00059.png

 

Tip: Press Spacebar to toggle between selected corner and curve reshape-nodes.

5Adjust stitch angles as required and press Enter.

lettering_edit00062.png

 

Tip: Holding down the Ctrl key, click the outline wherever you want to place an additional stitch angle.

6Adjust entry/exit points as required and press Enter.

lettering_edit00065.png

 

7Press Esc to finish.

ReshapeLetters0.png

 

Note: Custom fonts are saved in ESA format to in the USERLETW folder within the local EmbroideryStudio installation. If you want to adjust converted characters or add special characters to a custom font, you can do so via the Create Letter function.

Related topics...