Before you can transfer designs, your embroidery machine must be connected to the same local network as the computer running EmbroideryHub. The connection method depends on the machine or device:
3Brother machines connect directly using their built-in Wi-Fi capability.
3Happy machines connect directly to the local network using Ethernet.
Use the following steps to connect your machine. You need to do this before connecting EmbroideryHub to the machine.
1On your Brother machine, open the Settings menu.
2Select Network Settings > Wireless LAN.
3Follow the on-screen instructions to connect to your Wi-Fi network.
4Enter your Wi-Fi password if prompted.
5When the connection is successful, a Wi-Fi icon will appear on the machine’s screen.
1On the Happy machine Home screen, press Menu (bottom-right corner).
2Select Other.
3Press Network.
4If Manual appears in the top-right corner, press it. Otherwise, continue to the next step.
5Verify that Port No is set to ‘7891’. Change it if necessary.
6Press OK to connect the machine to the local network.
7Press Home (bottom-right corner) to return to the Home screen. Confirm that the Start/Stop button is lit green.
Products
EmbroideryStudio Add-ons
Solutions
Learning
Support
Connect
About Wilcom
