Digitizing for boring

Borers.png 

Use Function > Borers to activate the boring function.

In terms of digitizing technique, there is little practical difference between borer holes for multihead or for Schiffli machines. The basic sequence remains the same...

The boring sequence...

1Secure the fabric with stitching around the planned hole.

schiffli_digitizing00005.png

 

2Cut the fabric – one or more lines, small movements (1.2–1.5 mm).

schiffli_digitizing00008.png

 

3Pull out the loose fabric with manual or zigzag stitches.

schiffli_digitizing00011.png

 

4Finish the edges with satin.

Boring07.png

 

Related topics...